{"product_id":"us-made-polaris-rzr-1000-overhead-fans-2019-2023-all-models-copy","title":"US MADE Polaris RZR Trail and Trail S Overhead Fans 2022+","description":"\u003cp style=\"text-align: center;\"\u003eUpgrade your rides with a RZR Trail and Trail S 2022+  Overhead Fans By Inner Demon Motor sports. Our US-made, one-piece plug and play system boasts dual 10\" Spal Fans. Enjoy industry-leading power and efficiency with ease.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eWhat makes this an industry leading Overhead Fans?\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIP 68 Dual 10 inch 802 CFM Spal Fans\u003c\/li\u003e\n\u003cli\u003eMAX CFM 1604!\u003c\/li\u003e\n\u003cli\u003eIP 68 Dual control lighted switches for each of the Fans\u003c\/li\u003e\n\u003cli\u003eIP 68 lighted on\/off switch for the lights \u003c\/li\u003e\n\u003cli\u003eOne PCS 1\/8\" power coated aluminum frame \u003c\/li\u003e\n\u003cli\u003eStainless hard ware \u003c\/li\u003e\n\u003cli\u003ePlug and Play wire connections to the pulse bar Only, Two crimp connections are required for main harness. \u003c\/li\u003e\n\u003cli\u003eKeyed powered with pulse bar connection.\u003c\/li\u003e\n\u003cli\u003e4 year warranty \u003c\/li\u003e\n\u003cli\u003e25 amp max amp draw\u003c\/li\u003e\n\u003cli\u003eRunning draw of 13 amps \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe kit will include the following \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQty 1 Cyclone Overhead fan assembly with power disconnect \u003c\/li\u003e\n\u003cli\u003eQty 1 Mounting Kit\n\u003cul\u003e\n\u003cli\u003eQty 4 1.75\" Clamps\u003c\/li\u003e\n\u003cli\u003eQty 4 M6x30mm bolts \u003c\/li\u003e\n\u003cli\u003eQty 4 rubber gasket washers \u003c\/li\u003e\n\u003cli\u003eQty 4 stainless washers\u003c\/li\u003e\n\u003cli\u003eQty 4 M6 nylock hex nuts \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWiring harness \n\u003cul\u003e\n\u003cli\u003eQty 1 40 amp dual fused IP68 relay with Pulse bar plug \u003c\/li\u003e\n\u003cli\u003e8 Foot power harness to run inside (recommended) of the cage or the outside of the driver side A Pillar. One side with a power disconnect and the other side bar to make the final connections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTools required \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eM10 driver\/open end wrench \/ratchet wrench with 10mm socket \u003c\/li\u003e\n\u003cli\u003ePhillips screw driver \u003c\/li\u003e\n\u003cli\u003eWire terminal crimpers\/strippers\/cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDesigned, Built and tested in The USA. For Riders by Riders \u003c\/p\u003e\n\u003cp\u003eInstallation\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove front section of the roof\u003c\/li\u003e\n\u003cli\u003eRoute the 8 foot power wire through drive side A-Pilar and the dash into the front hood compartment area close to the pulse bar. The plug is for the fans and remains on the top side. \u003c\/li\u003e\n\u003cli\u003eSnap the Profit cage over brackets on to the machine from the out side in. They are tight and will flex\/bend over a snap into place.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ewhen bolting down the over head to the bracket the sequence is \n\u003cul\u003e\n\u003cli\u003eBolt\u003c\/li\u003e\n\u003cli\u003egasket washer \u003c\/li\u003e\n\u003cli\u003ethen through the Frame of the overhead\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ethrough the bracket \u003c\/li\u003e\n\u003cli\u003ewasher \u003c\/li\u003e\n\u003cli\u003enylock nut \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIts best to have help holding the over into place as you get the first two bolts started \u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eDO NOT\u003c\/span\u003e tighten the overhead down until all four bolts are in place and the over head is square between the cage. Then tighten down \u003c\/li\u003e\n\u003cli\u003eConnect power plug to over head harness at the fans.\u003c\/li\u003e\n\u003cli\u003ePlug the relay assembly into the open pulse bar slot \u003c\/li\u003e\n\u003cli\u003eMount the relay \u003c\/li\u003e\n\u003cli\u003eTrim power leads from the Overhead to length and connect \n\u003cul\u003e\n\u003cli\u003eBLACK to BLACK to the open connector\u003c\/li\u003e\n\u003cli\u003eRED (from long harness) Blue lead from the Relay\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTest over head and reassemble roof.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*Pictures are representation of the overhead assembly and may not represent the  current version of the product. \u003c\/p\u003e","brand":"HeaterCraft Products LLC.","offers":[{"title":"Default Title","offer_id":47281194303666,"sku":"IDM-OH-RZRT","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0592\/9726\/7890\/files\/IMG_2839.jpg?v=1753733838","url":"https:\/\/innerdemonmotorsports.com\/products\/us-made-polaris-rzr-1000-overhead-fans-2019-2023-all-models-copy","provider":" HeaterCraft Products LLC.","version":"1.0","type":"link"}