Heater Craft
Flush Mount Shower System
Couldn't load pickup availability
The Flush Mount Shower/Wash-down System can be plumbed into your boat in several ways. Use the on-board water system, plumb into the engine's raw water open cooling system or tap a raw water source.
112SC Kit Includes:
- Pump - 12V DC
- 10 position spray head
- Hot and cold water control bar with switch
- Mixer hose
- 6' hot water hose
- 6' cold water hose
- Hose barbs
- Hose clamps
- Installation Guide
112SCXL Kit Includes:
- Pump - 12V DC
- 10 position spray head
- Hot and cold water control bar with switch
- Mixer hose
- 15' hot water hose
- 6' cold water hose
- Hose barbs
- Hose clamps
- Installation Guide
111SB Kit Includes:
- Pump - 12V DC
- 10 position spray head
- Hot and cold water control bar
- Mixer hose
- Hose barbs
- Hose clamps
- Installation Guide
Specs:
- Size 3'' x 8'' x 3.5''
- Color - White
- Amp - 7.0
- Flow Rate - 3.0 gpm
- One year warranty
WARNING OVER CLOCKING THE KNOBS CAN CAUSE FAILURE WITH IN THE VALVE SYSTEM LEADING TO BUT NOT LIMITED TO BROKEN CARTRIDGE, STRIPPED/LOOSE/MISALIGNED KNOBS.
Proper function of the shower is to close the knobs until no water comes out of the shower head. If you feel resistance as you ope or close the knob stop and check to see if the water has stopped flowing.
*Picture of kit does not represent the current kit configuration
Customer Reviews
Install was easy and the shower works great. My only concerns = The low idle wye was for a 1-1/4” fresh water line hose. My boat was 1”. No big deal, as it’s easy to find a wye that fits. Next the valve was exactly like the picture. They hit panel was almost blank with no scale on the hot or cold valves leaving it a mystery as to what’s on or off, but logic will prevail.
Great shower, would prefer brass fittings verses the plastic