Skip to product information
1 of 5

HeaterCraft Products LLC.

Made in US, Polaris Xpedition ADV Outside Window Molle Panels

Regular price $239.99 USD
Regular price Sale price $239.99 USD
Sale Sold out
Shipping calculated at checkout.

Maximize your Polaris Xpedition ADV's cargo capacity with these US made outside MOLLE panels. Constructed from 1/8" , laser cut , powder-coated aluminum they provide a rugged mounting solution for securing additional gear, recovery equipment, or accessories. The bolt-on design ensures a secure  installation without permanent modifications. Built to withstand demanding off-road environments while maintaining structural integrity and corrosion resistance for years of reliable service

Include parts 

  • Driver and Passenger out side window panels 
  • Qty 12  M6 x 60 mm stainless steel bolts 
  • Qty 12 M6 gasket washers 
  • Qty 12  M6 nylock nuts
  • Qty 12  M6 SS washers 
  • Qty 12  M6 x 15/16"  spacers 

Tools 

  • 10 mm open end wrench/10 mm nut driver
  • Deep 10 mm Socket with ratchet
FEATURES
  • Made, Designed and Tested in the USA
  • Largest available MOLLE mounting system on the market.
  • MOLLE pouches, accessories and Quick Fist clamps , Compatible
  • Laser cut CNC steel construction
  • Premium black powder coat finish
  • Stainless hardware 
  • Steel bed rail anchors
  • Bolt on installation
  • Sold as a pair

Installation 

  1. Remove rear window from machine
  2. Remove bolts that hold glass into frame (leave the glass in the frame) place the bolts into a bag and keep the interior clips. 
  3. the sequence for hardware is 
    1. 60 mm bolt 
    2. Gasket washer on to bolt with gasket faceing panel
    3. insert through the panel 
    4. Spacer behind panel 
    5. M6 washer placed into recessed area on glass 
    6. Insert bolt with spacer through glass and factory clips 
    7. thread nut onto bolt to secure factory clips for reinstallation 
    8. Snug down new bolts 
  4. insert rear window back into machine and clip into place 
  5. Repeat for both side's 

Installation tip:

 start by getting at least one upper and lower mounting clip into place with one bolt, this will allow the glass to line up so you can feed the remaining bolts with gasketed washer, spacer, washer and finally into the clips to secure them down. 

The Molle panels will give 1" of clearance between the glass and the inside of the panel allowing you to bolt aditional items to the panel while keeping them from protruding too far. 

US Made by riders for riders 

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)