US MADE Polaris General Insulation/Deck liner 2016 to Present Models

Looking to quiet the cockpit down in your Polaris General? This U.S. made, 3/8" closed cell foam Liner reduces cab noise by 15% and is UL 94 certified flame retardant. Installs in about 30 mins and no tools are required. Temperature should be 55F+ degrees. Fits 2016-Present Models

Installation Steps

1. Remove your seats
2. Clean the firewall (behind the seats) with soap and water.
3. Wipe it down with alcohol and let it evaporate. 
4. Start with the two rectangle access panels, by peeling and sticking- these are your guides to install the larger portion of the Liner. 
5. Peel back and fold down the top 2.00" of the large section of liner and gently fit it over the two access panels- don't stick it yet.
6. Line up the top of the liner with the deck of the General and lightly press to hold it in place.
7. Slowly peel the adhesive backing downward and work it down past the access doors- holding the alignment over the access doors DO NOT FULLY PRESS INTO PLACE YET This can be installed by one person, however a second person helps line the foam piece.
8. Once you have checked the large foam piece is lined up and straight, you can now press into place with firm pressure. 
9. Reinstall your seats.